GENERAL PRECAUTIONS :

1. As with all electrical appliances, remove the connection to the wall socket.
2. Setup unit in a comfortable work area as the unit is heavy to work with.
3. Remove the heavy rollers stones and the drum unit aside.
4. Tools needed – wooden mallet/soft headed hammer, and a long blunt headed steel tool

INSTALLING THE BUSH BEARING

1. Place the bush bearing in the placeholder on the roller stone and gently tap with a wooden mallet or soft headed hammer, to force it into place.

REMOVING THE BUSH BEARING

Gently push/tap the bearing out using a blunt nosed long tool from the opposite in-side as shown in the images.